The K109PT-HPC is a high performance converter for thermoresistance Pt100 with 2, 3, 4 wires and provides a mA/V stamdard output signal. The max admitted error is lower than the K109PT because reported to a smaller range. It's completely configurable through dip switches. A 3 way galvanic isolation among power supply, input, and output circuits assures the integrity of your data.

Input: Pt100 at 2, 3, 4 Wires with Zero and Span Configurable by Dip-Switch
Output: Current (0/4-20 mA, 20-4/0 mA) or Voltage (0-5/10, 10-0, 1-5 VDC)
Precision Class: 0.1%

Power Supply:
Channels:
Accuracy:

Status Indicators:


Galvanic Isolation:
Hot Swapping:
Power Consumption:
A/D Converter:
Current Output Protection:
Security Output:

Humidity:
Design:
Filter Rejection:
Dip Switch:

Processing:
Dimensions:
Weight:
Operating Temperature:
Connections:
IP Protection:
Standards:



Approvals:

19.2 to 30 VDC
1 Input, 1 Output
Error: 0.1% (max range)
or (40 K/temp +0.05) % (Measurement Range)
Setting Error
Wrong Connection
Internal Improper Functioning
Power Supply, Input, Output at 1500 VAC, Digital
Yes
500 mW
14 bit
Approximately 25 mA
102.5% of Full Scale Value, in Case of Over-Range
105% of Full Scale Value in Case of Improper Functioning
30 to 90% at +40°C (Not Condensing)
Terminal Housing for Mounting on 35 mm DIN 46277
50-60 Hz (settable)
Inputs Signal Setup
Output Signal Setup
Floating Point 32 bit
6.2 x 93.1 x 102.5 mm (W x H x D)
50 g
-20 to +65 °C
Plug-in Screw Clamp Terminal Blocks, Wires up to 2.5 mm²
IP 20
EN50081-2
EN50082-2
EN61010-1
EN60742
CE, UL-CSA