The S315 is the new indicator of the compact S-Series, is a loop powered, high performance digital display. The maximum error is only 0.005% with up to 16 bits. S315 stands a measurement loop of the active device (Vmax = 30 V), which must be greater than the maximum voltage across the voltage drop (7V). Programming is possible via the front menu keys. Access can be controlled via passwords. S315 acquires signals 4-20 mA current. All parameters of the configuration and display can be set to any menu with access protected by password.

Power Supply:
Voltage Drop:
ADC Resolution:
Memory:
Display:
Front Buttons:
Accuracy:
Thermal Stability:
Linearity:
Electromagnetic Interference:
Error Warning:

Operating Temperature:
Storage Temperature:
Humidity:
Housing:
Protection Degree:
Terminal Blocks:
Dimensions:
Hole Dimensions:
Weight:
Settings:

Access Protection:
Conformity:
Standards:

By the input loop (Max 30 V)
Max 7 V
16 bit (40.000 points)
EEPROM, 10 years
LED, 4 digits
3(down, up, menu)
0.05%
0.005%/K
0.05%
< 1%
Value > 3% of full scale or greater than 9999
Value < 3% of start scale or lower than -9999
-10 to +65 C
-30 to +85 C
Min 30%, Max 90% not condensing
PPO auto extinguish, DIN 43700
IP65
Screws: 2 ways (power supply)
96 x 48 x 40 mm
91 x 45 mm
200 g
Password, input type, start/full electric scale, start/full display scale, decimal point, filter level
Through password
CE
EN 61000-6-4, EN 64000-6, EN 61010-1, EN 60742

Channels:
Type and Range:

1
Current (4-20 mA)