Z-GPRS is a ModBUS Master module for wireless data acquisition and recording. It is able to receive and transmit commands, measures, and alarms. Z-GPRS can be used in photovoltaic applications, building automation, telemetry, and M2M communication, industrial remote control, remote environmental and energy control. It works as a stand-alone unit or as node of a network. Z-GPRS is also a GSM/GPRS standard modem used without additional programming, with SMS, e-mail and point to point communication mode. The GSM module supports serial connections at 9600 bps and the following protocols: SMTP, FTP, POP3, and HTTP through Internet.

Power Supply:
Power Consumption:
Isolation:
Status LED:
Operating Temperature:
Dimensions:
Connections:



Mounting:
Communication Ports

GSM/GPRS Modem Quad Band:


Microprocessor:
Memory:

System Protocols:
Digital Input:
Digital Output:

DIP Switches:
SMS & Alarm:
Approvals:
Standards:

12 to 40 VDC or 12 to 28 VAC (50-60 Hz)
1.2 W
1.5 kVAC (power supply/input/output)
Power Supply/GSM Network
-30 to +60 °C
17.5 x 100 x 112 (W x H x D)
Frontal DB9 Connector
Back IDC10 Connector
Screw Clamp Max 2.5 mm²
Antenna Connector SMA Standard
For DIN Rail Guide
Integrated RS232, max speed: 115 kbits/s, isolated
Integrated RS485, max speed: 115 kbits/s, isolated
Frequency 850/900/1800/1900 MHz
Voice, Data, Short Message Service (SMS)
GSM Supplementary Services
32 bit
Flash 4 MB
1 MB RAM
ModBUS RTU Master
2 Isolated Channels, with power supply 12 to 30 VDC, Max Load 30 VDC
2 Isolated Channels, a Mosfet with common ground, max load 50 mA / 50 VDC
Baud rate, parity, serial port, bit stop, termination line
Output & input, Users List, Network Parameters & RTC
CE
EN 301 511
EN 301 489-1
EN 301 489-7
EN 60950