HOMECONTACTNEWSPRODUCTSSUPPORTSALES
Like UsFollow UsConnect With Us
PRODUCTS

Compact Converters & IsolatorsModular Converters & IsolatorsTwo-Wire TransmittersI/O Systems (ModBUS & CANopen)Remote Telemetry UnitsCommunication InterfacesHMIs & DisplaysSoftware
PRODUCT SEARCH

  

HELPFUL LINKS

Software DownloadsDatasheets & ManualsRequest a QuoteAbout Us

Z202 - AC Voltage to DC Isolator / Converter
Z202
Input: Voltage (10-490 VAC in 41 Preset scales)
Output: Current (0-20, 4-20 mA) Higher Load Resistance: 600 Ohm, Voltage (0-5, 1-5, 0-10, 2-10 VDC) Lower Load Resistance: 2.5 kOhm


Datasheet

Manual

Z-Line Flyer



Product Information

Power Supply:
Channels:
Accuracy:
Status Indicators:
Galvanic Isolation:

Hot Swapping:
Power Consumption:
Sampling Frequency:
Protections:
Installation Class:

Humidity:
Design:
Admitted Overload:
DIP Switch:
Enclosure:
Dimensions:
Weight:
Operating Temperature:
Connections:
IP Protection:
Standards:



Approvals:

9 to 40 VDC or 19 to 28 VAC
1
0.3%
Power
Galvanic isolation @ 3-way: 3.75 k Vac between input, power supply, output and 1.5 kVac between power supply and output circuits
Yes
2.5 W
33 samples/second
Surges: 400 W/ms. Loop supply short-circuit protected
III, it can be applied on a three-phase network up to 500 V AC phase-phase, 300 V AC phase-ground
30-90% at +40 °C (not condensing)
Terminal housing for mounting on 25 mm DIN 46277
Up to 10% of end scale
Inputs signal setup
"V0" self-extinguishing glass filled nylon case
17.5 x 100 x 112 mm (W x H x D)
140 g
0 to +60 °C
Plug-in screw clamp terminal blocks, wires up to 2.5 mm²
IP 20
EN50081-2
EN50082-2
EN61010-1
EN60742
CE
© COPYRIGHT 2016 SENECA INSTRUMENTS, INC. ALL RIGHTS RESERVED