HOMECONTACTNEWSPRODUCTSSUPPORTSALES
Like UsFollow UsConnect With Us
PRODUCTS

Compact Converters & IsolatorsModular Converters & IsolatorsTwo-Wire TransmittersI/O Systems (ModBUS & CANopen)Remote Telemetry UnitsCommunication InterfacesHMIs & DisplaysSoftware
PRODUCT SEARCH

  

HELPFUL LINKS

Software DownloadsDatasheets & ManualsRequest a QuoteAbout Us

Z-10-D-IN - 10 Channel Digital Input Module / RS485
Z-10-D-IN
Z-10-D-IN is a 10 digital input module with self-powered 16V DC shared negative pole. Z-10-D-IN has 8 built-in inputs with 16 bit contactor with 100 Hz max. Frequency and 2 inputs with 32 bit contactor with 10 kHz max. frequency. At 10 kHz Z-10-D-IN assures frequency measurement. For 100 Hz input the module measures period, frequency, TON, and TOFF. The module offers possibility to set total counters for forward or backward counting. Z-10-D-IN gives an overflow indication for each total counter.

Channels: 10 Optoisolated Inputs (10 optoisolated inputs suitable for reed switches, PNP & NPN proximity switches, contact closure. 8 inputs with 16 bit counters at a max frequency of 100 Hz, 2 inputs with 32 bit counters at a max frequency of 10 kHz.)


Datasheet

Manual

ModBUS Overview



Product Information

Power Supply:
Power Consumption:
Isolation:
Overload Protection:
Power Supply Transients:
Transducer Power Supply:
Status Indicators:




Installation Category:
Pollution Category:
Ingress Protection:<
Operating Temperature:
Storage Temperature:
Humidity:
Dimensions:
Weight:
Case:
Hot Swapping:
Connections:
Mounting:

19 to 40 VDC, 19 to 28 VAC 50-60 Hz
Max 2.5 W; 1.6 W @ 24 VDC
1.500 kVAC between inputs and all other low voltage circuits
Inputs protected transients up to 400 W/ms
Transient protection to 400 W/ms
20 VDC @ 80 mA Max
Power ON
Error
Data Transmit (Tx)
Data Receive (Rx)
10 Input Status
II
2
IP 20
0 to +55 °C
-20 to +70 °C
30-90% at +40 °C(non condensing)
17.5 x 100 x 112 mm
Approx. 140 g
Nylon 6, 30% fiberglass filled, self extinguishing class V0
Yes
Plug-in, screw terminals for 2.5 mm² conductors (max)
35 mm symmetrical DIN rail (Top Hat Section)
© COPYRIGHT 2016 SENECA INSTRUMENTS, INC. ALL RIGHTS RESERVED