Power Supply:

Max Consumption:
Isolation:
Input Protection:
Rejection:
Status Indicators (LED):
Dimensions:
Housing, Weight, Color:
Operating Temperature:
Connection:


Protection Degree:
Configuration:


Supported Protocols:


Max CANopen Speed:
Standards & Approvals:

10 to 40 VDC, 19 to 28 VAC
Strain gauge powered by the device
2 W
1.500 kVAC (3 Way)
Against ESD up to 4 kV
Settable 50 or 60 Hz
Power, Communication, Fault
17.5 x 100 x 112 mm
PBT, 140 g, black
-10 to +65 °C
Screw-fit removable for wires up to 3.5 mm
IDC10 Back connector for DIN rail frontal Jack RS232 (ModBUS) (COM) connection
IP20
DIP switches (baud rate, ID Node)
EDS
IEC 61131 (setting, stable weight, alarm, threshold, remote wiring)
CAN bus standard (2.0 A)
CANopen (profile CiA 401 v.2.01)
ModBUS RTU (via RS232)
1 Mbps
CE, EN 61000-6-4, EN 64000-6-2, EN 61010-1
CAN 2.0A
CiA 401 v.2.01
IEC EN 61131-2

Channels:
Analog Input:
Strain Gauge:


ADC:
Thermal Drift:
Precision:
Sampling Frequency:

1 Analog / 1 Digital
Differential Measure at 4/6 wires (±5 mV..±320 mV)
Voltage Supply 5 VDC
Min Input Impedance 87 Ω
Sensitivity from ±1mV/V to ±64mV/V
24 bit
< 25 ppm/°C
0.01%
12.53 to 151.71 Hz

NMT:
Error Control:
Node ID:
Nr PDO:
PDO Modes:
PDO Linking:
PDO Mapping:
Nr SDO Server:
Emergency Messages:
Application Layer:
Profile:

Slave
Node gaurding
Software, DIP Switches
RX 5
Event Triggered, Sync (cyclic), Sync (acyclic)
Yes
Variable
1
Yes
CiA 301 v.4.02
CiA 401 v.2.01